Option
CS-301
Test fixture S
Standard with CS-3100 main unit
CS-302
Test fixture M
CS-3200 CS-3300 Standard with each main unit
CS-303
Test fixture M
CS-5100 / CS-5200 / CS-5300 Standard with each main unit
CS-304
Test fixture M
Standard with CS-5400 main unit
CS-305
Test fixture L
Signal light, thermo switch, cooling fan, equipped with LED light, interlock
CS-307
Test fixture
For CS-3000/CS-5000 (excluding CS-5400)
CS-307H
Test fixture
For CS-5400
CS-306
Prober cable
For CS-3000/CS-5000 (excluding CS-5400)
CS-308
Prober cable
For CS-5400
PA-3020/3040/4030
Hot plate
Non-isolated type
CS-310
Test fixture for thermal streamer
CS-521
Adapter for thermal streamer
Supported package: TO (CS-501A heat-resistant support)
CS-522
Adapter for thermal streamer
Supported package:TO-263-3 (D2PAK)
(CS-503 heat resistant)
CS-523
Adapter for thermal streamer
Supported package: TO-252-3 (CS-504 heat-resistant support)
IE-1310
CS setup controller
Ideal for production lines because the settings can be switched without any menu operation on the main unit.
Test adapter option
CS-500
Test adapter (1 standard with main unit)
Heat resistant TO socket
200℃, 350A(500μs)
For TSSOP14
*Test fixture CS-301 cannot be used
CS-501A
TO type test adapter
This is a socket suitable for TO type packages (3 terminals).
It can be used with lead spacing from 1.52mm to 4.57mm.
CS-502
AXIAL type adapter
1kV / 1A MAX
CS-503
TO-263-3 (D2APK) type adapter
CS-504
TO-252-3 type adapter
CS-505
TO-263-7 type adapter
CS-506
TO-252-5 type adapter
CS-507
SC-70-3 (SOT-323-3) type adapter
CS-508
SMD tip type adapter
CS-509
SC-59A (SOT-23-3) type adapter
CS-510
SC-62 (SOT-89) type adapter
CS-700 Series options
CS-701
Switch control module
It is an indispensable unit that collectively controls each unit from the semiconductor parameter measurement software CS-810 by connecting it with a PC by Ethernet.
One unit can control up to 8 units. By assigning an IP address, parallel operation using multiple units (up to 10 units) is also possible.
CS-702
LV relay unit
300V/7.5A/30A(Pulse) 10CH
CS-703
HV relay unit
5kV/0.5A 10CH
CS-704
HC relay unit
2kV/7.5A/1,500A(Pulse) 10CH
CS-705
HV/HC switch unit
With 5kV/1,000A (Pulse) HV/HC switching (manual) function for CS-3200/3300/5200/5300
CS-706
Extension unit
If you wish to use 5kV/1,000A (Pulse) CS-5400, you will need to modify it
CS-707
Gate/short unit
It is possible to shorten the G-E or C-G intervals of elements that are not being measured during measurement of a 6 in 1 module.
Curve tracer side: 300V/7.5A/15A (Pulse) Device side: 5kV/7.5A/15A(Pulse) 10CH
CS-708
HV-HC relay unit
5kV/7.5A/1,500A(Pulse) 2CH
CS-709
HV-HC relay unit
5kV/7.5A/1,500A(Pulse) 4CH
CS-710
HV/HC switch unit
With 5kV/1,500A (Pulse) HV/HC switching (manual) function for CS-5400
Option
CS-001 (red 10 pcs)
Small crocodile clip
This is a small crocodile clip that can be attached to a wire set.
CS-002 (black 10 pcs)
Small crocodile clip
This is a small crocodile clip that can be attached to a wire set.
CS-003
High voltage wire red 5 pcs set
CS-004
Wire black 5 pcs set
CS-005
Standard lead set
This is a lead set that comes as a standard accessory with the main unit.
CS-006
Cables for high current 20cm x 2 sets
Standard accessory with the CS-5400 main unit
CS-007
Cables for high current 30cm x 2 sets
Standard accessory with the CS-10400 or CS-10800 main unit
Software
CS-800
Semiconductor parameter search body software
Software option to be integrated and used in the main unit.
Embedded
Software
CS-801
Double sweep
Software option to be integrated and used in the main unit.
Embedded
Software
CS-810
Semiconductor parameter measurement PC software
This is the software used on the PC (sold separately) when the SC-800 is installed on the main unit.
PC software
