Overview Specifications Operability, Display and
Analytical Functions Various Software Options

Digital Oscilloscope "ViewGo II" DS-5400A Series Options

Dedicated Options

DS-576

GPIB interface

DS-576

DS-579

Probe Power Options

DS-579

Number of output channels: 2
Maximum output power:

9 VAmax

* Use the 2CH so that the total current consumption does not exceed 750mA.

Offset

Output voltage adjustment function

 

* FET probe-only valid functions

 From the Utilities menu of the ViewGo II Series unit, it can be set for each channel.
Compatible probes:

Current probe

SS-531 / SS-530 / SS-521 / SS-520 / SS-570 / SS-560 / SS-550 / SS-540

* The above probes require a power conversion cable SS-200-IW.

 

SS-270 / SS-260 / SS-250 / SS-240A / SS-240

 

FET probes

SFP-5A / SFP-4A


High voltage differential probe
　SS-320

IE-1226 (Made-to-order)

The VGA Video OUT option
waveform screen can be output to an external display.
* After implementing IE-1226, DS-579 cannot be used.

IE-1226 VGA options

Carrying bag

DS-5500 bag

Standard probe

SS-0130R

Frequency bandwidth:DC~200MHz
Input RC:10MΩ//12.5pF
Attenuation:10:1
Length:1.5m

SS-0130R

High voltage differential probe

SS-320

Frequency bandwidthDC~100MHz
Attenuation:50:1, 500:1
Maximum differential operating voltage:±1400 V(DC+AC peak,
500:1
Full length:2m

SS-320

DS-579

Probe Power Options
Probes compatible with probe power units
for ViewGo II are available here.

DS-579

Probe Power Supply PS-25

Power supply for SFP-5A/4A/SS-320
Power output: ±12V (±5%, 120mA max) x 2ch
Offset signal output: ±1.6V
(in combination with SFP-5A/4A, offset adjustment of ±20V is possible)

PS-25

Active Probes

DS-579

Probe Power Options
Probes compatible with probe power units
for ViewGo II are available here.

DS-579

Probe Power Supply PS-25

Power supply for SFP-5A/4A/SS-320
Power output: ±12V (±5%, 120mA max) x 2ch
Offset signal output: ±1.6V
(in combination with SFP-5A/4A, offset adjustment of ±20V is possible)

PS-25

High Voltage Probes

PHV 1000-RO

Attenuation ratio… 100:1, Input RC… 50MΩ 7.5pF
Frequency band… 400MHz (for single probe)
Capacitance variable range… 10-50pF, Length… 2m

PHV1000

HV-P30A

DC to 50MHz, DC-30kV, pulse 40kV

HV-P30A

HV-P60A

DC to 50MHz, DC-60kV, pulse 80kV

HV-P60A

  • High-voltage probes should be selected after checking the derating characteristics.

Current probe

Rogowski-Coil Current Probe SS-28xA Series

Frequency bandwidth:fL~30MHz
Maximum peak current :3,000A
Sensor unit temperature range:-40℃~125℃

Rogowski-Coil Current Probe

Rogowski-Coil Current Probe SS-29x Series

Frequency band: S-type -fL to 20MHz, L-type -fL to 10MHz
Maximum peak current: 12kA
Sensor temperature range:-40℃~125℃

Rogowski-Coil Current Probe

DS-579

Probe Power Options
Probes compatible with probe power units
for ViewGo II Series are available here.

DS-579

  • In the case of a single probe, a calibration certificate, traceability system figure, and inspection report will be charged separately.